TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set
TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set

TROPO-6-5-COM // 6.5” 160 Watt 2-Way Shallow Component Speaker Set

Regular price 27% OFF Before: $109.99 Sale pricePrice: $79.99
/
$79.99
Details

CT Sounds designed the Tropo 6.5” shallow-mount component speaker set to compliment aftermarket subwoofer setups without stealing electrical (power) from your subwoofers and needing a 4-channel amplifier for these speakers to perform. The 6.5” 2-way component speaker set is engineered to be loud and clear on head-unit power while still offering solid mid-bass and not distorting at higher volume levels. 

Quick Facts:
RMS Power: 80 Watts (Pair)
MAX Power: 160 Watts (Pair)
Impedance: Single 4-Ohm
Mounting Depth: 1.81"

Many vehicle manufacturers (Ford, Chevy, Toyota, etc.) have very shallow speaker slots, making it challenging to install aftermarket speakers without the window glass hitting the speaker magnet when rolling it down. To prevent this issue, you need to add spacers to lift the speaker, however, this creates a new problem where the speaker starts to contact the door panel due to cone excursion. The CT Sounds Tropo 6.5” component speaker has a 1.81” mounting depth (unheard of!) and is the only 6.5” component woofer in car audio that offers a solution at the 80-watt rms power level.

Do your stock speakers sound distorted at higher volumes? Are you craving speakers that get loud and sound clean and can keep up with your subwoofer setup? Are you looking for an inexpensive way to get your speakers on the same level as your subwoofers? If yes, these are the perfect speakers for you!

Specs
General Specifications:
Speaker Size: 6.5"
Speaker Type: 2-Way Component Speaker Set
Impedance Per Speaker: Single 4-Ohm
Power Per Speaker: 40W (RMS) | 80W (MAX)
Total System Power: 80W (RMS) | 160W (MAX)
Woofer Specifications:
Voice Coil Size: 1.00"
Voice Coil Wire Material: EISV
Voice Coil Bobbin Material: Kapton
Magnet Weight: 9 Oz
Magnet Type: Ferrite
Cone Material: Black Vacuum Polypropylene
Surround Material: 70° Nitrile Butadiene Rubber
Basket Type: Steel
Terminal Type: Steel Plate (Big Plate = Positive)
Output SPL (@1w/1m): 87 dB
Frequency Response (@SPL -10dB): 30 Hz - 20 kHz
Resonant Frequency: 75 Hz
Sweep Voltage: 8.76 V
X-Over Point: 4.0 kHz
Tweeter Specifications:
Tweeter Size: 20 mm
Tweeter Type: Silk-Dome
Magnet Type: Neodymium
Output SPL (@1w/1m): 90 dB
Frequency Response (@SPL -10dB): 1000 Hz ~ 20 kHz
Sweep Voltage: 2.8 V
Crossover Specifications:
Crossover Circuit: 3.3 μF capacitor / 100 V
Filter For Woofer: 12 dB
Filter For Tweeter: 12 dB
LPF X-Over Point: 20 Hz - 3.5 kHz
HPF X-Over Point: 3.5 kHz - 20 kHz
What's Included:
6.5" Component Woofer x2
0.75" Silk-Dome Tweeter x2
12 dB Passive Crossover Network x2
10FT - Speaker Wire for Woofer x2
6FT - Speaker Wire for Tweeter x2
6FT - Speaker Wire for Crossover x2
1.25" Mounting Screws x8
Flush-Mount Tweeter Pod x2
Angled Tweeter Pod x2
CT Sounds Decal Sticker (Square) x1
Mounting info
Mounting Specifications:
Overall Diameter: 6.59"
Cut-out Diameter: 5.60"
Magnet Diameter: 3.35"
Magnet Height: 0.67"
Mounting Depth: 1.81"
Overall Height: 2.01"
Screwhole Diameter: 6.12"

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)